Handlebars

We threw in a bit of everything for our take on the ultimate gravel handlebar setup. Rise, sweep, and flare make for an ultra-comfortable handlebar that keeps you in control no matter the terrain. Add the Cruise Control Top and Drop Grips and our Really Long Bar Tape to get to next-level comfort and performance. For the rider that wants to go everywhere, the Kitchen Sink Handlebar is the bar that has everything. With widths from 44 cm up to 50 cm, it's clear we believe in wide. But the added stability and control of a wider bar should not come at the cost of comfort. So we've thrown everything into this handlebar: - 20mm RISE means less pressure on the hands and a broad range of fit options. - 7° SWEEP means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops. - 25° FLARE on a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use. - Optional endurance loop adds an alternative aerodynamic riding position and a perfect spot for gear storage and mounting accessories.

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners. - Stiff, precise, and width-optimized for enduro, trail and aggressive xc - Carbon fiber perfection - DESCENDANT geometry from their best enduro rider’s input - Signature Troy Lee Designs style

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.

Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders. - Includes decal sheet to color match with ENVE wheel decals

Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

Rise and shred. A lightweight carbon MTB riser bar born to rip. Where it thrives: In competition, challenging trails What it's built for: Precision, control, durability Highlights: - Carbon fiber construction - Lightweight - 780mm wide, 9 deg backsweep, 4 deg upsweep, 31.8 diameter

XC superstar. Marginal gains aren't just for the road. This XC-focused carbon MTB bar is one of the lightest around. Where it thrives: In competition, challenging trails What it's built for: Precision, control, durability Highlights: - Carbon fiber construction - Lightweight - 760mm wide, 0 rise, 9 deg backsweep, 31.8 diameter

Descend with confidence. 16% more compliant than our competitors, this enduro and gravity focused handlebar that doesn't forget about weight or compliance. Where it thrives: Challenging trails, down hills What it's built for: Stability, control, confidence Highlights: - Carbon fiber construction for compliance and weight savings - 800mm width, 35mm clamp size, 210g - 30mm rise, 8 degree backsweep, 5 degree upsweep